2S 7.4V 8A Li-Ion Cell BMS Charging Protection Module

2S 7.4V 8A Li-Ion Cell BMS Charging Protection Module – OverviewThe 2S 7.4V 8A Li-Ion Cell BMS Charging Protection Module is a compact Battery Management System (BMS) engineered for 2-series (2S) Lithium-Ion and Lithium Polymer battery packs. Designed to protect and balance cells during charging and discharging, this module offers reliable safety features and stable performance for DIY battery packs, robotics, LED lighting, power banks and other portable electronics.2S 7.4V BMS Module ImageKey Protections and How They WorkOvercharge Protection: Cuts off charging when individual cell voltage approaches the safe threshold (around 4.25 ±0.05V per cell) to prevent overheating and cell damage.Over-discharge Protection: Disconnects output when cell voltage drops below safe limits (around 2.7 ±0.1V per cell) to preserve capacity and lifespan.Overcurrent and Short-Circuit Protection: Detects sudden current surges and short circuits, shutting down the output. Typical overcurrent threshold is around 12A for protection events.Cell Balancing: Passive balancing maintains uniform voltage between the two cells during charge cycles to avoid one cell degrading faster than the other.Automatic Recovery: After a fault condition clears and voltages/currents return to safe ranges, the module automatically resumes normal operation without manual reset.Key Features and SpecificationsCompatible with 2S (2-cell) 7.4V Li-Ion / Li-Po battery packsContinuous discharge current: up to 8AOvercharge protection voltage: ~4.25 ±0.05V per cellOver-discharge protection voltage: ~2.7 ±0.1V per cellOvercurrent protection threshold: ~12A (typical)Operating temperature range: -20°C to 60°CCompact PCB design for easy integration into custom projectsSupports charging with CC/CV Li-Ion compatible chargersApplicationsDIY battery packs for robotics and automationPortable LED strips and lighting systemsIoT devices and smart sensors that require compact powerPower banks and small energy storage projectsRC hobby projects and electronics prototypesInstallation Tips and CompatibilityVerify cell orientation and wiring before connecting the BMS; wrong wiring can damage the module and cells.Use proper fusing in-line with the battery pack when integrating into high-reliability systems.This module is intended for medium-power applications; for higher continuous current demands choose a BMS rated above 8A.Charge using a CC/CV charger designed for Li-Ion/Li-Po chemistry and within the specified voltage limits.Maintain operating environment within -20°C to 60°C for reliable performance.Safety NotesDo not expose the module to water or corrosive environments.Always observe correct polarity and secure soldered or crimped connections.Keep the BMS mounted on a non-conductive surface to prevent shorts.Images are for illustration purposes only; actual module appearance may vary.Why Choose This 2S 7.4V 8A BMSThis module combines essential safety protections and cell balancing in a compact form factor, making it an excellent choice for hobbyists and makers building reliable 2S battery solutions. Its automatic recovery, clear protection thresholds, and simple integration help extend battery life and protect connected devices from common battery faults. Category: BMS Modules and Accessories College Road Electronics4.85 (317 Reviews)