16×2 LCD Display Green LED Backlight

16×2 LCD Display Green LED Backlight is based on the HD44870 display controller hence it is easy to interface with most micro controllers. This is a basic 16 character by 2 line Alphanumeric display. Black text on Green background. Interface code is freely available. You will need Minimum 6 general I/O pins to interface to this LCD screen. Includes LED backlight. Works in 4 bit and 8 bit Mode. It works of 5V and has a green back light which can be switched on and off as desired. The contrast of the screen can also be controlled by varying the voltage at the contrast control pin (pin 3). This is a basic 16 character by 2 lines Alphanumeric display. Black text on Green background. Utilizes the extremely common HD44780 parallel interface chipset. Interface code is freely available. You will need a Minimum of 6 general I/O pins to interface to this LCD screen. Includes LED backlight. Works in 4bit and 8 bit Mode. Whenever we work with an embedded system we need a reliable output device with the help of which we get the required information, now this problem is solved with the introduction of 16 characters by 2 (16X2) LCD. Uses – Alphanumeric output, Information Display, Process status, in short, we can keep eye on every move of our microcontroller. Available with a male connector for easy interface with microcontroller. Features: 16 Characters x 2 Lines Green Backlight 5×7 Dot Matrix Character Cursor HD44780 Equivalent LCD Controller/driver Built-In 4-bit or 8-bit MPU Interface Standard Type Works with almost any Microcontroller 16 characters wide, 2 rows White text on the blue background Single LED backlight included can be dimmed easily with a resistor or PWM. Can be fully controlled with only 6 digital lines! (Any analog/digital pins can be used) Package Includes: 1 x 16×2 LCD Display Green LED Backlight